The job
A works crew with a vacuum excavation truck needed a day on the shoulder of Williamstown Road, near the Williamstown CFS station, about an hour from our Wingfield depot. The truck and crew had to work right beside the traffic lane.
The road
Williamstown Road is a state-managed road with a posted speed of 100 km/h, winding through tall gums on the edge of the Barossa. High speed, bends and trees limit how far ahead drivers can see, so the set-up has to give them plenty of warning before they reach the work.

The permit and the plan
The job ran under a Department for Infrastructure and Transport permit for stop/slow traffic control with the speed reduced to 40 km/h, with the first sign out at 7am and the last removed by 5pm. Because the posted speed was 100 km/h, the traffic guidance scheme used the longer sign spacing and buffer zones that high-speed roads need. A side road near the work was also closed, with a detour signed.
How the crew ran it
Two accredited traffic controllers came out in two of our traffic utes, each carrying signs, cones and a roof-mounted arrow board, with portable traffic signals on hand too. The crew set out the advance warning signs, the 40 km/h zone and the cone taper, then controlled traffic past the truck with stop/slow for the day.

A trainee traffic controller worked the shift alongside an experienced controller, logging supervised hours toward their accreditation. That is how we grow our own crews: real jobs, with someone beside them who has done it many times.
The result
The works crew got a full day of protected work time beside a 100 km/h road, and traffic kept moving through the site in both directions. Everything was packed away and the road was back to normal speed by the end of the permit window.
See more of our work in the towns and suburbs we cover, or read what a traffic guidance scheme is and when you need one.